Support

Instruction

  • Surfaces to be coated must be clean and relatively smooth. Surface humidity should be between 12% and 28%.
  • Mixture proportion of powder and water is 3/1 (e.g: 16 liters of clean water for  40 kg bag). Pour powder into the water slowly to avoid clump.
  • Wait 5 minutes, then mix again before use.

 

Storage

  • Storage in a dry place and do not stack over 10 bags.
  • Keep out of floor and direct sunlight
  • Packing bag must be closed after every use.

 

Caution

  • Skim coat shouldn't be applied at over 3 mm thick.
  • Read instruction carefully before use.

Technical specifications

Properties
 Value
 Standard
Color White
Smoothing 4% VN Standard 7239 : 2003
Volume 990 g/dm³ VN Standard 7239 : 2003
Drying time

Initial dry time: 3h

Final dry time:  5h10min

 VN Standard 7239 : 2003
Water retention 99.5% VN Standard 7239 : 2003
Surface hardness (after 96h = 4 days) 40 x 20 VN Standard 7239 : 2003
Surface adhesion (after 24h = 1 day) 0.3N/mm² VN Standard 7239 : 2003
Reliability No blistering VN Standard 7239 : 2003
Waterproofing Excellent
Theoretical coverage 0.95 kg/mm²

Introduction

INTRAMIX skim coat is a material to smooth out rough or damaged ceilings and walls before coating. With high adhesion as well as durability, it can be used to repair entire walls or fill deep scratches, holes and water - damaged portions of drywall. It is very convenient to use exterior or interior and environmentally safe. INTRAMIX skim coat can  be recommended as a right problem - solving primer for your special needs.

Components:

Carbonate Calcium/ Cement Portland/ Calcium Sulfate/ Polymers

intramix